Coil rods work well as concrete forming systems because the continuous loose threads allow for dust and dirt without interfering with threading
Threaded Rod, Coil, Medium Carbon, Plain Finish
The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.
Rod |
T.P.I. |
Tensile |
Root Dia |
Major Dia |
Safe WLL (lbs) ** |
|||
Dia |
Stress Area |
|||||||
Max |
Min |
Max |
Min |
Tensile |
Shear |
|||
1/2" |
6 |
0.1385 |
.425 |
.420 |
.500 |
.486 |
9,000 |
6,000 |
3/4" |
4.5 |
0.3066 |
.635 |
.625 |
.750 |
.740 |
18,000 |
12,000 |
1" |
3.5 |
0.5408 |
.840 |
.830 |
.985 |
.965 |
38,000 |
25,300 |
1-1/4" |
3.5 |
0.9072 |
1.085 |
1.075 |
1.225 |
1.215 |
56,000 |
37,500 |
Length is measured end to end using a tolerance of +/- ½” ** Safety factor of approximately 2:1
Specification Requirements:
Dimensions: |
See major diameter and length requirement above. |
Material: |
AISI 1035-1055 medium Carbon steel |
Mechanical Properties: |
See Working Load Limits (WLL) above |
Finish: |
Plain |